Development of A New Type of Antifogging Agent for Cerium Oxide Glass

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

Cerium Oxide – What’s it all about? Cerium oxide is either a pale yellowish-brown or light yellowish powder. The bulk density of Cerium oxide is approximately 7.13g/cm3, and the melting point at 2397. The substance is insoluble with water and alkali but somewhat soluble in acids. To make cerium trioxide, heat can reduce cerium oxide to 2000°C at 15MPa. Cerium oxide turns slightly yellowish or reddish if it is exposed to temperatures between 2000°C & 5MPa. It can be used as a polishing material, catalyst carrier (auxiliary agents), catalyst, catalyst, or catalyst, and also for fuel cell electrolytes. It can also be used in automobile exhaust absorption, electronic ceramics, and other applications.

Daily Life

Antifogging Glass Agent Wet or rainy weather can make it easy for moisture to form on glass products like building glass, windshields, rearview lenses, spectacle lenses, etc. This is due to humidity. Water droplets that form on glass substrate in the shape of small hemispheres can cause a prism-like reflection effect. It also affects visibility and light transmittance. Fogging of glass may cause problems in people’s lives and can even pose a danger to their safety. The visibility of light transmittance and mirror imaging will be affected by particles like dust or oil. This is why anti-fogging can be closely linked to both work and personal life. People use many different methods to fix this problem. It is common to use the antifogging technique, which is simple and easily applied. A variety of solvents and wetting agents are used in surfactant antifogging agent. While this anti-fogging agents is relatively easy to make, they are difficult to lose due to water condensation on glass. In general, anti-fog lasts between 2-7 days. We are currently comparing the results from adding oxides in anti-fogging agents. Photocatalytic TiO2 is one of the most popular anti-fog films. Nano-titanium dioxide can diffuse small water droplets onto the glass surface and create a uniform film. This surface is not susceptible to light scattering fog. It can also maintain high transparency levels without burning. Use safely This anti-fog material is safe. It has good abrasion resistance as well as abrasion and solvent resistance. The next step is SiO2 antifog and TO2/SiO2 compo-fog films. But, this process can prove difficult and challenging in harsh environments.

Nano-cerium Oxide Glass Antifogging Medic

Its special surface effects and volume effects determine the special chemical properties of nanocerium oxide particles and their special effects. This includes enhancing the surface adsorption of nano-cerium oxide particles, improving specific surface area and increasing surface activity. It also has high catalytic efficiency. The light it emits has both a catalytic and hydrophilic function. An ultrafine CeO2 particle can be added to anti-fogging. This will increase the agent’s surface adsorption. It also can absorb ultraviolet light which helps prevent them from rays. Finally, the CeO2 can act as a photocatalyst and can even help the organic on the glass surface.

A new form of cerium dioxide glass anti-fogging agents with good antisfogging effects, long antisfogging times, stability, safety, and easy production has been developed using nano-rare Earth ceriumoxid as a raw materials.

Nano-cerium Oxide

preparation process

Add a little cerium oxide to a cup of concentrated HNO3 or H2O2 to dissolve. Prepare a 0.5mol/LCeNO33 aqueous mixture and heat slowly. When the temperature reaches above 180 degrees, it will evaporate to create a brown aerogel. This is used to produce nano-CeO2 powder.

The Preparation Method Of Nano Cerium Oxide Antfogging Agent

Use appropriate dispersants, additives or surfactants to combine the antifogging agent. Conduct experiments using the single factor optimization to find the most effective formula. Intelligent-materials advanced materials Tech Co., Ltd (Intelligent-materials ), a cerium powder company with 12+ years in chemical products development and research, is Intelligent-materials . We can provide high-quality cerium oxide powder. Please contact us to send an enquiry.
Inquiry us